mirror of
https://github.com/TomHodson/tomhodson.github.com.git
synced 2025-06-26 10:01:18 +02:00
4b473c4bf3
commit 95c9eb09fb95bb65e6d8836f908ff551fd66b4a8
Author: Tom <thomas.hodson@ecmwf.int>
Date: Fri Apr 4 22:48:31 2025 +0100
New post
164 lines
3.8 KiB
INI
164 lines
3.8 KiB
INI
# This file is originally from https://github.com/Klipper3d/klipper/blob/master/config/printer-elegoo-neptune2-2021.cfg
|
|
|
|
# Paste here and save your klipper configuration
|
|
# This file contains standard pin mappings for the stock Elegoo Neptune 2 with a
|
|
# ZNP Robin Nano (v 1.2 and v1.3) board.
|
|
# For the 1.2 board:
|
|
# - Compile with the processor model STM32F103.
|
|
# - Enable "extra low-level configuration options"
|
|
# - Select the 28KiB bootloader,
|
|
# - Select (Serial (on # USART3 PB11/PB10) for the communication interface.
|
|
# Note that the "make flash" command does not work with ZNP Robin boards. After
|
|
# running "make", run the following command:
|
|
# ./scripts/update_mks_robin.py out/klipper.bin out/elegoo.bin
|
|
#
|
|
# For the 1.3 board:
|
|
# - Compile with the processor model STM32F407.
|
|
# - Enable "extra low-level configuration options"
|
|
# - Select the 32KiB bootloader,
|
|
# - Select (Serial (on # USART3 PB11/PB10) for the communication interface.
|
|
# Note that the "make flash" command does not work with ZNP Robin boards. After
|
|
# running "make", run the following command:
|
|
# cp out/klipper.bin out/elegoo.bin
|
|
#
|
|
# Copy the file out/elegoo.bin to an SD card and then restart the printer with
|
|
# that SD card.
|
|
# See docs/Config_Reference.md for a description of parameters.
|
|
|
|
[bltouch]
|
|
sensor_pin: ^PC4
|
|
control_pin: PA8
|
|
z_offset: 3.1
|
|
x_offset: -35
|
|
y_offset: -1
|
|
stow_on_each_sample: false
|
|
probe_with_touch_mode: true
|
|
|
|
[stepper_x]
|
|
step_pin: PE3
|
|
dir_pin: PE2
|
|
enable_pin: !PE4
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: PA15
|
|
position_endstop: 0
|
|
position_max: 235
|
|
homing_speed: 50
|
|
|
|
[stepper_y]
|
|
step_pin: PE0
|
|
dir_pin: PB9
|
|
enable_pin: !PE1
|
|
microsteps: 16
|
|
rotation_distance: 40
|
|
endstop_pin: PA12
|
|
position_endstop: 0
|
|
position_max: 235
|
|
homing_speed: 50
|
|
|
|
[stepper_z]
|
|
step_pin: PB5
|
|
dir_pin: !PB4
|
|
enable_pin: !PB8
|
|
microsteps: 16
|
|
rotation_distance: 8
|
|
endstop_pin: PA11
|
|
position_endstop: 0.7
|
|
position_max: 250
|
|
|
|
[extruder]
|
|
max_extrude_only_distance: 100.0
|
|
step_pin: PD6
|
|
dir_pin: PD3
|
|
enable_pin: !PB3
|
|
microsteps: 16
|
|
rotation_distance: 3.433 # https://biqu.equipment/products/biqu-h2-v2s-extruder-for-b1-bx-ender-3-3-v2-5-6-cr6-10
|
|
nozzle_diameter: 0.400
|
|
filament_diameter: 1.750
|
|
heater_pin: PC3
|
|
sensor_type: EPCOS 100K B57560G104F
|
|
sensor_pin: PC1
|
|
# tuned for stock hardware with 210 degree Celsius target
|
|
control: pid
|
|
pid_Kp: 29.056
|
|
pid_Ki: 1.628
|
|
pid_Kd: 129.664
|
|
min_temp: 0
|
|
max_temp: 260
|
|
|
|
[filament_switch_sensor filament_sensor]
|
|
pause_on_runout: True
|
|
switch_pin: PA4
|
|
|
|
[heater_bed]
|
|
heater_pin: PA0
|
|
sensor_type: EPCOS 100K B57560G104F
|
|
sensor_pin: PC0
|
|
# tuned for stock hardware with 60 degree Celsius target
|
|
control: pid
|
|
pid_Kp: 70.857
|
|
pid_Ki: 1.221
|
|
pid_Kd: 1028.316
|
|
min_temp: 0
|
|
max_temp: 110
|
|
|
|
# cools the control board and hotend cooler fans
|
|
# enabled whenever any of the stepper controllers are active
|
|
[heater_fan hotend_fan]
|
|
pin: PB0
|
|
heater: extruder
|
|
heater_temp: 50.0
|
|
|
|
# controls the part cooling fan
|
|
[fan]
|
|
pin: PB1
|
|
|
|
[mcu]
|
|
serial: /dev/ttyUSB0
|
|
restart_method: command
|
|
|
|
[bed_screws]
|
|
screw1: 32.5, 32.5
|
|
screw2: 32.5, 202.5
|
|
screw3: 202.5, 32.5
|
|
screw4: 202.5, 202.5
|
|
|
|
[printer]
|
|
kinematics: cartesian
|
|
max_velocity: 300
|
|
max_accel: 3000
|
|
max_z_velocity: 5
|
|
max_z_accel: 100
|
|
|
|
[bed_mesh]
|
|
speed: 120
|
|
horizontal_move_z: 7
|
|
mesh_min: 40, 40
|
|
mesh_max: 200, 200
|
|
probe_count: 4, 4
|
|
|
|
[static_digital_output display_reset]
|
|
# the FSMC touchscreen isn't supported, so we'll just disable it
|
|
pins: !PC6, !PD13
|
|
|
|
#*# <---------------------- SAVE_CONFIG ---------------------->
|
|
#*# DO NOT EDIT THIS BLOCK OR BELOW. The contents are auto-generated.
|
|
#*#
|
|
#*# [bed_mesh default]
|
|
#*# version = 1
|
|
#*# points =
|
|
#*# 0.105000, 0.125000, 0.060000, 0.037500
|
|
#*# 0.060000, 0.102500, 0.142500, -0.105000
|
|
#*# 0.017500, 0.110000, 0.152500, -0.132500
|
|
#*# 0.022500, 0.115000, 0.097500, -0.085000
|
|
#*# tension = 0.2
|
|
#*# min_x = 40.0
|
|
#*# algo = lagrange
|
|
#*# y_count = 4
|
|
#*# mesh_y_pps = 2
|
|
#*# min_y = 40.0
|
|
#*# x_count = 4
|
|
#*# max_y = 199.99
|
|
#*# mesh_x_pps = 2
|
|
#*# max_x = 199.99
|